Wiring Loom Harness

Land Rover Defender heated seat wiring loom harness cable kit Puma TD4 Tdci


Land Rover Defender heated seat wiring loom harness cable kit Puma TD4 Tdci

Land Rover Defender heated seat wiring loom harness cable kit Puma TD4 Tdci   Land Rover Defender heated seat wiring loom harness cable kit Puma TD4 Tdci

SEATS OR SWITCHES ARE NOT SUPPLIED THIS IS THE WIRING LOOM ONLY. Land Rover Defender Td4 / Tdci Puma made from 2007 until 2016 wiring loom with IGNSENS to suit YUF500150LNF heated front seat switches and fitted with OEM Land Rover heated seat connectors. The illumination and negative cables are 500mm long so are suitable for splicing into an existing switch. The power in and out cables are 3200mm long so can reach easily to the battery box and to each seat. When seats are fitted in the factory fuse position 33 is used and normally not wired unless seats were fitted.

To make the install easier we supply a small box which is wired directly to the battery and provides outputs for the left and right seat which are only live when the engine is running. The cables are colour coded to match the OEM Defender wiring and will plug straight into the original Land Rover heated seats as fitted from 2002 and will only require a suitable earth connection for the black wire. This listing is TWO harnesses - Switches are NOT supplied.
Land Rover Defender heated seat wiring loom harness cable kit Puma TD4 Tdci   Land Rover Defender heated seat wiring loom harness cable kit Puma TD4 Tdci