Wiring Loom Harness

Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST


Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST
Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST
Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST
Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST

Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST    Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST

Ford Ecoboost Engine Swap wiring & ECU. Plug and Play electronic solution with instructions. CAN-BUS emulator and engine ECU included. Adapter was developed to allow the installation / swap of a Ford Fiesta ST 1.6 Ecoboost engine. With our Kit you don't need to install any other ECU / clocks / cluster / immobiliser from original Ford Fiesta.

Only need the engine ECU that is included in our Kit. This Wiring Adapter is very easy to install.

Basically you only need to connect some plugs, power supply (+12 V) and ground. You will find all the information needed and photos on the installation procedure included in this sale.

Ument explaining the parts needed to make your engine swap. Basically, with the engine, you need to have the Main engine wiring harness (that has one plug to connect on the ECU). 1.6 Ecoboost engine is a very interesting engine to swap because its powerful, small and reliable. There are many aftermarket parts available to increase the power output even more.

The engine ECU included in our Kit has the Immo / PATS system disabled to simplify your engine swap. Our ECU has the software of the Fiesta ST200 original engine.

This was the best version Ford produced. This Wiring adapter also includes an. OBD connector to allow you to make diagnostic to the engine ECU and modify / tune your ECU if you want. Also included are additional wire outputs that you can use if wanted.

These are: RPM signal, temperature signal, oil pressure light, MIL light, alternator / battery light. Stage 1 ECU Tuning: if you want we can upgrade the ECU with a Stage 1 from a reputed Fiesta ST tuner. With this ECU upgrade your engine will produce between 220 to 245 bhp depending on other mods you have (intake, exhaust or intercooler). 90 for this ECU upgrade. We have available solutions for the following Ecoboost engines.

1.0 and 1.6 Ecoboost from Fiesta 2013-18. 2.0 Ecoboost from Focus ST 2011-19. 2.0 Ecoboost from Edge / Escape / Fusion / Taurus 2014-19.

2.3 Ecoboost from Mustang. 2.3 Ecoboost from Focus RS. To build our wiring harness adaptors, we only use new, original and high quality electronic components. We Speak English, Portuguese, French and German.

Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice.


Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST    Ford 1.6 Ecoboost Engine Swap wiring harness Kit / Adapter Loom & ECU/ Fiesta ST