WHAT YOU GET : Starting with a brand new 1963 > Present'Standard' Stratocaster pickguard, a full-size die-cut aluminium shielding plate is added, then a matched set of' Texas Blues' hand-wound in the UK single-coils from Axesrus are hard-wired in... Rather than me list an'anecdotal' description of these fantastic pickups, copy and paste the link below into a new tab to find out all about them, listen to the sound clips and read the glowing reviews... Then exactly the same 5-way setup, featuring master Volume/Tone, the second tone pot. Being replaced with a no-load Blend Pot, as featured in my other Strat listing is hard-wired in to give the following switching options; WHAT IT DOES : (1) Neck..................... Add Bridge with Blend Pot.
Add Bridge (3) Middle (4) Middle & Bridge... Add Neck As you can see, with the Blend Pot.
In the'no load' position, you have a standard 5-way Strat setup. Wind the Blend fully on though, and you have the added advantage of the Tele-style Bridge & Neck in Positions (1) & (5), and all three together at Positions (2) & (4) - how cool is that! An incredibly versatile 7-way Strat. That behaves just like a standard Strat. Exactly when you want it to - and those pickups are about as good as you are going to get when you are searching for the best Strat. From Rory Gallagher to Mark Knopfler, via SRV,'The Malice From Dallas' do it all...This being a Rhoadhouse - equipped custom special we just had to get at least one solderless connector in there! So I've wired in a single connector block between the selector switch and the volume just for the output socket: this means you have NO soldering to do in order to complete your build/upgrade. Simply remove your complete OEM pickguard, cut the wires to the output socket and bridge claw ground at the pot's, drop in the new Rhoadhouse pickguard, clip the three wires you just cut to the solderless connector, screw down the pickguard, re-string, tune, and away you go, job done! NB : As with all my hardware, I keep nothing'on the shelf,' it is ALL, without exception, handbuilt to order. That way, if you, the customer, have any specific alterations you may like to request, they can be incorporated into the build.
This is hand built custom hardware, NOT mass-produced factory OEM, and as such it MAY sometimes take a little longer to dispatch than I would prefer, especially during busy and Holiday periods, so your patience and understanding would be greatly appreciated. ALL Axesrus pickups are hand-wound in their own workshop here in the UK, not rebadged Artek hardware from Korea. I can honestly say their work is unbeatable at any price, and their Customer Service is second to none. It is a standard'64 onwards template, which will fit 99% of American and MiM bodies, and the screw holes will all line up: on many Strat- style bodies (including the Bullet/Affinity range) not all of the holes will line up, so you'll have to make some new ones...
Anything more than that, you're laughing, anything less and you'd need to remove some wood - something I have no problem with myself, but not everyone wants to do that, so make sure you get a steel rule in there before you order The neck cut-out is standard Fender Strat, so if you were fitting this to a Fender Strat- style body with a slightly wider heel you would have to file it to fit. It's also a measure of just how much confidence I have in my own work. It is no idle boast to say you could fit this to a cheap'n'cheerful budget Strat. Copy and it would knock spots off any Squier, MiM/MiJ Fender, and many a Fender USA costing significantly more than what it would cost you to find this out for yourself! So, reassuringly expensive this may be but if you consider just what you are getting for your hard-earned cash, then you'll suss you're actually looking at a pretty shrewd investment. Yes, I'll freely admit I'm biased but you won't find a better setup at many times the price... However, I make no provision for Import Duty, etc, so these are entirely the Customers own responsibilty where incurred. As I always point out, all our products are individually hand made to order that's how I keep down the costs to pass onto you, the customer... I can promise you will not be disappointed.This listing is for the FULLY LOADED pickguard only , anything else appearing in the photo's is for illustrative purposes only and is/are not included. So there you have it: take a good look at the photo's up top there and put this on your Watch List while you think about making one of the best investments you'll ever choose.. Any and all enquiries welcome.
Keep on rockin' with The Rhoadhouse... The Rhoadhouse & FSG uitars totally recommend top quality pickups by Axesrus (Check out the sound clips on their own website). The item "Fender Stratocaster drop in FULLY LOADED pickguard wiring kit loom harness" is in sale since Friday, July 29, 2016. This item is in the category "Musical Instruments\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickguards". The seller is "the_rhoadhouse" and is located in Heathfield, East Sussex.
This item can be shipped worldwide.