MBE 9A4 Ignition Only Harness To Suit A Vauxhall 2.0 XE

  
Supplier Of Motorsport Wiring Harnesses & Electronics. MBE 9A4 Ignition Only Harness To Suit A Vauxhall 2.0 XE - Motorsport/Rally/Race. MBE 9A4 Ignition Only Harness&#######xA0. MBE 9A4 ignition only harness designed to suit a Vauxhall 2.0 Ltr XE engine. This harness has the following connections. Vauxhall OEM crank sensor input. Colvern/Jennvey throttle position sensor input.

Vauxhall non amplified 4 pin ignition coil output (sagem, valeo etc). 2 Pin water temperature&#######xA0;sensor input. This harness is designed to work with a jennvey/colvern throttle position sensor, if you require this to work with a different style sensor then please let us know.

The harness is designed to work with a 4 pin non amplified ignition coil pack, this will not work if you are still using the original distributor and ignition coil. We specialise in Motorsport Electronics and custom wiring solutions. We offer free support & advice when products are bought through us.

More Motorsport Electronics Can Be Found On Our Website! FREE Support With Products Bought Through Us. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B.

&#######xA0; &#######xA0; &#######xA0; &#######xA0; &#######xA0. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Any product you return must be in the same condition you received it and in the original packaging. MBE 9A4 Ignition Only Harness MBE 9A4 ignition only harness designed to suit a Vauxhall 2.0 Ltr XE engine. This harness has the following connections: Vauxhall OEM crank sensor input Colvern/Jennvey throttle position sensor input Vauxhall non amplified 4 pin ignition coil output (sagem, valeo etc) 2 Pin water temperature sensor input Cooling fan relay output Fuel pump relay output Shift light output Taco/rev counter output This harness is designed to work with a jennvey/colvern throttle position sensor, if you require this to work with a different style sensor then please let us know.

The item "MBE 9A4 Ignition Only Harness To Suit A Vauxhall 2.0 XE" is in sale since Tuesday, April 2, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms".motorsportsshop" and is located in llanfyllin, Powys.

This item can be shipped worldwide.

1. Non-Domestic Product: No
2. Modified Item: No
3. Country/Region of Manufacture: United Kingdom
4. Custom Bundle: No
5. Manufacturer Part Number: Does Not Apply
6. Brand: S.