Holden HZ TWIN Headlight CONVERSION H1-H1 to H4-H1 +RELAY Wiring Loom Harness

  

HOLDEN & FORD REBUILD ESSENTIALS. Radiator & Heat & Cool. Struts - Bonnet & Boot.

Holden HZ TWIN Headlight CONVERSION H1-H1 to H4-H1 +RELAY Wiring Loom Harness. This wiring loom will convert your factory HZ twin headlight H1 (low beam) and H1 (high beam) set up to the improved H4 (High / Low beam) and H1 (High beam). The H1 / H1 setup was standard for HZ Premier, Statesman and Caprice twin headlights where the outside H1 headlights were low beam only and the inner H1 were high beam only. So in low beam only the two outer H1 headlights and on and when flicked to high beam the two outers stay on low beam and the inner H1 headlights come on as high beam i. In High beam mode you have two on low beam and two on high beam.

THIS CONVERSION IS NECESSARY SO YOU DONT HAVE THE H4 LOW AND HIGH BEAMS PLUS THE INNER H1 HIGH BEAMS ALL OPERATING AT ONCE - THIS WILL OVERLOAD YOUR WIRING, BLOW FUSES AND DAMAGE YOU NEW WIRING LOOM. The H4 / H1 setup has the outside H4 headlights as low beam AND high beam and the inner H1 is high beam only. So when you activate high beam you have the outer H4 headlights flick up to high beam and the inner H1 headlights also come on i. Four x high beam headlights. This H4 / H1 Conversion Headlight Wiring Loom or harness has incorporated RELAYS.

If you're thinking you would like some more candle power at the fornt of your car and want anything over the standard 55watts you need to consider adding a relay to your looms whicj this kit incorporates. Et the best performance from your light upgrade kit using this new exclusive Plug n' Play H4 / H1 twin headlight loom with relays. Based off the original type twin headlight loom, this OEM style kit has been improved with a low & high beam relay to give maximum voltage to your headlights, also taking the strain and overheating off your original wiring & switches. Twin Headlight with Single or Twin Horns.

HZ Premier, Stratesman, Caprice with original Factory H1 OUTERS (low beam ONLY) and H1 INNERS (high beam only). Brand new reproduction to original specifications. Correct lengths & wire colours.

Will suit twin headlight with single or twin horn applications with H4 OUTERS & H1 INNERS (6.3mm terminals). Genuine OEM terminals & connectors throughout. Wrapped in original style 1 glue-less harness tape.

6 way connection to plug directly into your original main loom. H1 inner light connections, park/indicator wiring to suit original or aftermarket assemblies. Twin or single horn applications.

Integrated relays designed to clip onto your batter tray - very professional finish. NO globes or headlighs included.

Note; This kit incorporates all required wiring and presumes the battery is in the original location under the bonnet. For best results this loom requires a positive battery connector that accepts additional wires (the old'spring' clamp battery terminal isn't suitable). Thanks for looking and don't forget to check out all our Restoration Essentials in our store. (formally Kingswood Country) was first established in 1986. Came about because in addition to specialising in new Restoration, Used and New (genuine / non-genuine) parts for your Holden Kingswood & Torana we are also now growing our range of parts for pre-Kingswood models plus Commodore and early Fords.

We source and manufacture a range of restoration parts for your dream car rebuild. These are the best and closest we can find to original parts at affordable prices and we are proud to offer these under our own. We are a family owned and operated independent business located in Melbourne's Sth East suburb of Moorabbin. Thanks for looking at our store and hope to talk with you soon. Any questions please send us a message and we will get straight onto it for you.

We're a shop/warehouse and you are most welcome to drop in and browse or pick-up your items. We accept payments to suit your requirements. BANK TRANSFER or BANK DEPOSIT. Online or over your Bank's counter. Our bank details are displayed when you are in checkout.

We're a shop/warehouse in Moorabbin. You are most welcome to drop in and browse or pick-up your items.

By consolidating your parts into the one parcel. We can only do this before you pay for the items. Most parts are sent by Australia Post'eParcel' with tracking and larger parts by door-to-door courier. Parts that can't be sent by Australia Post will be sent by door-to-door Courier and details will be emailed to you for this process. Currently our Australian Webstore only has the Australian GST applied.

We offer good old fashioned, common sense warranties. We may need proof (pics etc) so we can claim against the carrier.

The item "Holden HZ TWIN Headlight CONVERSION H1-H1 to H4-H1 +RELAY Wiring Loom Harness" is in sale since Wednesday, November 11, 2020. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Headlights". The seller is "restocountry" and is located in Melbourne.

This item can be shipped to Australia, all countries in Europe, United States, Japan, Canada, New Zealand.

1. Brand: Unbranded
2. MPN: Does not apply
3. Manufacturer Part Number: Does not apply